GDGVRN Home How to Choose Attic Insulation

How to Choose Attic Insulation

Joe Blow’s Insulation insulation is essential for a comfortable home, saving energy costs and reducing environmental impact. However, insulating your attic requires careful planning and attention to detail.

The R-value of the insulation you choose will have a significant impact on your home’s energy efficiency. A higher R-value equates to greater thermal resistance and greater savings.

Fiberglass is a common option and comes in batts, which can be installed between joists or on the attic floor. It is made from recycled sand and glass, is a fire-resistant material and can help control moisture.

Winter-Ready Attics: Strategies for Effective Insulation to Keep Your Home Cozy

Mineral wool is another attic insulation material. It is also made from recycled materials and has a high R-value, providing an average of 3.1 to 3.4 per inch when blown in or installed in fiberglass rolls. It is naturally resistant to moisture, making it a good choice for attic insulation that will come into contact with rain or snow.

Cellulose is a popular attic insulation, with an R-value of about 3.5 per inch. It is made from paper and recycled materials, which makes it eco-friendly. It is often treated with ammonium sulfate and borate to make it flame-resistant. However, it does absorb water and can become heavy over time, increasing the risk of sagging ceilings and drywall.

Most professional installers will use wet-spray cellulose to minimize dust and the risk of mold and mildew growth in your attic. It is a more labor-intensive method, but it provides the highest R-value and ensures that there are no gaps or air pockets in your attic’s new insulation.

Joe Blow’s Insulation
29712 US Hwy 19 N Unit 409 Clearwater, FL 33761
727-454-0172

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post

Benefits of Spray Foam InsulationBenefits of Spray Foam Insulation

 

It is 316 Insulation of Seattle to note that it’s best to have a professional technician apply this spray foam insulation, as it will off-gas a large amount of volatile organic compounds during both the application and curing process. This includes isocyanates, which are powerful irritants that can cause irritation to the eyes, gastrointestinal tract and respiratory tract. Some individuals also experience a rash on the skin after exposure. Long-term exposure can lead to asthma attacks and chemical bronchitis.

The Process of Installing Spray Foam Insulation with 316 Insulation of Seattle

In addition to reducing your utility bills, this type of insulation can help improve indoor air quality in your home or commercial property. By stopping the flow of polluted outdoor air into your building, spray foam keeps mold, mildew and other allergens out. Moreover, it stops your HVAC filters from becoming dirty and clogged.

If you want to enjoy the benefits of this insulation, it is best to contact a reputable and certified installation company like 316 Insulation. We specialize in enhancing your home’s energy efficiency with attic and wall insulation, as well as safeguarding your property with crawlspace encapsulation services. Count on us for quality craftsmanship and reliable installations, as well as a commitment to customer satisfaction.

316 Insulation of Seattle
2420 E Union St Seattle WA 98122
253-332-7606

EcoHome Spray Foam InsulationEcoHome Spray Foam Insulation

Attic insulation can be a great investment, helping to reduce energy bills and increase the value of your property. However, there are some things you should be aware of before making the decision to go with spray insulation for your home.

The chemicals used in spray foam (either open or closed cell) give off toxic gasses and can cause irritation to your eyes and throat if the application is not correctly done by a trained professional. For this reason it is important that you stay out of the property during and while the product is curing. It is also very important that you wear a face mask and respirator during the installation process to ensure that your health and safety are protected.

EcoHome Spray Foam: The Benefits of Closed-Cell Spray Foam Insulation

This product is sprayed on-site to create an air and vapor barrier in the wall, roof or underfloor of your property. This stops heat escaping in the winter and prevents cold air from entering your property in summer, which can significantly reduce your heating costs. It is also very effective in reducing underfloor draughts and can help to minimize allergies, especially for those who suffer from asthma.

Open-cell spray foam expands to fill gaps and voids and can reach hard-to-reach areas such as attic rim joists, crawl spaces and knee walls. Closed-cell spray foam is denser and expands less but still provides good insulating value as well as moisture resistance. It is important that these products are installed by a qualified technician to ensure the correct mixture of polyurethane and isocyanate to achieve optimal performance and durability.

EcoHome Spray Foam
3601 Lebanon Rd, Lebanon, TN 37087
(615) 573-4106

New Generation Spray Foam InsulationNew Generation Spray Foam Insulation

New Generation Spray Foam is a fast-growing alternative to traditional fiberglass and cellulose. It is a durable, lightweight and cost-effective way to save energy and reduce utility bills in residential and commercial buildings. With the cold winter weather approaching, it’s time to start thinking about upgrading your home or business’s insulation. There are several options, but we recommend looking into closed-cell spray foam.

When properly installed, it can improve the energy efficiency of your building by preventing air leakage and keeping conditioned air inside. This means that your heating and cooling systems won’t need to work as hard, thereby lowering your energy consumption.

Energy Efficiency with New Generation Spray Foam Insulation

Another advantage of spray foam is that it is non-toxic and safe for occupants once it has cured. It does off-gas a small amount of volatile organic compounds (VOCs) during the application and curing process, so it is important to use gloves, goggles, and respirators.

It also is extremely versatile, unlike some other types of insulation. You can apply it to roofs, walls, basements, attics, or anywhere else that needs a good layer of protection. Its application is very simple: just “point and spray,” sealing up nooks and crannies that may cause poor temperature regulation in your space. The resulting stable indoor temperatures will lower your utility bills and keep you warm all winter long. If you’re ready to make the switch, get in touch with a local TruTeam branch today. They’ll be happy to answer any questions you have about this great alternative to traditional insulation.


New Generation Spray Foam
200 Chesterton Dr, Athens, GA 30607
7062010538